China Cemented tungsten carbide wire drawing die factory and suppliers

Cemented tungsten carbide wire drawing die

Short Description:

Cemented carbide wire drawing die as a tool material has been increasingly used for cutting tools, wear-resistant tools, impact-resistant tools, and other products with special purpose. Cemented carbide was first used in stretching mold area and has gone though cast iron mold, alloy steel mold, diamond dies, cemented carbide dies, polycrystalline module die and other developmental stages. With the property of high wear resistance, good polishing performance, low friction coefficient, etc., cemented carbide drawing die has been a substitute of steel mould which is used to stretching steel and non-ferrous metal.

Min.Order Quantity: 1 set

Payment: T/T

Supply: 1 SET PER 20 WORKING DAYS

Delivery period: Shipped in 15 days after payment

Packaging: standard seaworthy packing for concrete block making machine

Send email to us Download as PDF

Product Detail

Product Tags

Grades for tungsten carbide drawing dies

Grade	Density (g/cm3)	Hardness (HRA)	TRS (MPa)	Average Grain Size (um)
YL01	15.25	93.5	3300	0.8
YL10.2	14.5	92.0	4000	0.8
YG6	14.95	90.0	2400	1.6
YG6X	14.95	91.5	1900	1.0
YG8	14.75	89.5	2800	1.6
YG11	14.4	87.5	3100	1.6
YG15	14.05	87.0	3000	1.6

Grade	Application Recommended
YL01	Used sor drawing diameters less than 1.5mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous metals with high requirements on surface finish.
YL10.2	Used sor drawing diameters between 1.5mm to 10mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous tubes with high requirements on surface finish.
YG6	Used sor drawing diameters less than20mm of steel, nonferrous and its alloy wire or bar under a mede- -rate stress. It's also used for tubes less than diameters of10mm.
YG6X	Used sor drawing diameters less than20mm of steel, nonferrous and its alloy wire or bar under a mede- -rate stress. It's also used for tubes less than diameters of10mm.
YG8	Used sor drawing diameters less than 50mm of steel, nonferrous and its alloy wire or bar under a mede- -rate stress. It's also used for tubes under35mm.
YG11	Used sor drawing diameters less than 60mm of steel, nonferrous and its alloy wire or bar under a mede- -rate stress. It's also used for tubes under35mm.
YG15	Used for steel pipe and steel bar as well as alloy steel bolt and head forging of rivet under a certain big stress.